Parallel execution with fabric
October 08, 2010 at 07:00 PM | categories: Programming | View Comments
It's been a wish for some for a long time
Since at least 07/21/2009 the desire to have fully parallel execution across hosts, or something similar to that. I stumbled upon the thread around March of this year. Being that I'd been using Fabric for a number of months at this point, and had recently made a script set for work stuff that leveraged multiprocessing I decided to give the issue a go.
What I implemented, and why
The short of it being that I made a data structure, Job_Queue that I feed fab tasks into and it will keep a running 'bubble' (works like a pool) of multiprocessing Processes going executing the Fabric tasks as they are able to do so. The job queue having a pool size as set by the user, or 1/2 the size of the host list if not specified, or if the pool size is larger than the host list size, it will match the host list size.
Why not threads?
Because they won't do what I want parallel execution in Fabric to accomplish. Namely
- I can't be sure that the task is only IO bound as users can call anything as it 'just python', and the GIL will trip up fully parallel tasks.
- With threads there is an issue noted in the docs about importing in threaded code which is something a user of Fabric is more than welcome to do.
- The need for inter-process communication isn't there. Tasks are by their nature encapsulated, and don't talk to one another when being run.
OK so why not X instead?
There seems to have been a glut of good work done recently in the python ecosystem on getting around the issues people are having with the GIL. Some names that I can recall being Twisted, Tornado, pprocess, and PP. I am sure there are a lot more. There also the neat looking execnet project that offers direct communication to a python interpreter over an open socket.
Those got tossed out because they each have something that causes them to not fit some or all three requirements I gave modules to use.
- Cross platform Win/Mac/Linux
- Works on Python 2.5+
- Is in the stdlib
All of those fail the last requirement, and granted it perhaps wouldn't be hard to get users to install yet another dep, but it is best to avoid things like that if at all possible. Keeps the moving parts down, and the issues you have to debug less foreign. Note though that the other two criteria I set could actually be met by any in list above, I am writing this much removed from my initial decision process.
So forks, why create a new Queue/Pool?
Trickery.
The multiprocessing module has a lot of really nice builtins that I attempted to leverage, but there really just wasn't a way to do what I needed to do with them. Queue was nice for having a list of Processes, but I needed a worker pool. Pool provided this, but then the workers were anonymous, and I wasn't able to set names as a cheap way to keep track of which host it was to run on.
So I had to make something up. That's what Job_Queue is for. All it does if take a load of Processes and then when the job queue is closed, one starts it, and off it goes. It'll make a bubble of a certain size that it will keep the number of currently running forks under, and will just move that bubble along the internal queue it had from the loading.
So it looks a bit like this:
--------------------------- [-----]-------------------- ---[-----]----------------- ---------[-----]----------- ------------------[-----]-- --------------------[-----] ---------------------------
The trickery comes in when in the fabric job_queue.py I set the job.name of the Process to the host, and inside the queue I leverage this with:
env.host_string = env.host = job.name job.start() self._running.append(job)
Which will set the host for the task at run time, since otherwise Fabric would have gotten confused. It would have continued to iterate the same host, because of the shared state env and it's host list isn't really able to be progressed, because the forks aren't sharing it anymore, and are instead working in isolation from one another.
While that could have been a reason to use threads, or something like the Manager that multiprocessing offers, it's really the only time it comes up, and it keeps things a lot simper at the moment. Not to say that if someone is convincing enough I'd probably get behind a more robust solution.
What this branch adds to Fabric
There are new command flags for fab:
-P, --parallel use the multiprocessing module to fork by hosts -z FORKS, --pool-size=FORKS Set the number of forks to use in the pool.
I have also added two decorators:
@runs_parallel @runs_sequential
These will allow a fab file command to be set to be run either in parallel or sequentially regardless of the fab command flag. Without these commands switch when the flag is set.
What that means is that any tasks that are decorated are always run as either parallel or sequential. Tasks that omit these decorators though, are going to be able to switch back and forth between running parallel or running sequentially. Something the user would be specifying at run time with the -P flag.
With the new stuff comes a few caveats
If you are interested in the guts, the implementation is in the main.py file, and uses the Job_Queue class in the job_queue.py file. Note that this is only implemented in the fab command, as there is no way to determine how one will execute functions if they are using Fabric as a helper library.
If the runs_once decorator is being used on a function that is called from inside a fabric task, it won't be able to be honored. Because the states in the forks are separate, and every fork will think it's the first one to run the function. Simple solution being to make the call it's own task call.
Now to see it in use
Here is a little example of a fab file that is running some command on the server that will take 10 seconds to run. Yeah sleep is a bit of cheat for this, but it's good enough to show the benefit of forking out tasks that'd take a crap ton of time otherwise
from fabric.api import *
from server_list import servers
env.roledefs = servers.server_classes
@roles('servers')
def poke():
run("sleep 10")
Running it
In parallel, as specified on the cli. Note that this is an example of not in using the decorators to set this in the code, so it as a task/function can toggle between being run in parallel or sequentially. There are 49 servers in the 'servers' list that I'm applying to this task.
$ time fab poke -P -z 20
...
real 0m45.868s
user 1m7.928s
sys 0m8.425s
Now the long runner. It takes ... forever.
$ time fab poke
...
real 8m51.477s
user 6m3.239s
sys 1m26.637s
The difference is pretty dramatic. We get a 8 min fab task dropped down to less than one min.
Just cause I though it was neat
This is a glimpse of what it'll look like in the process tree. Those are the forks running their tasks, and the children under them are the threads that bitprophet added into Fabric core for greatly improved stream handling.
$ pstree -paul
...
│ ├─bash,20062
│ │ └─fab,21455 /home/mgoose/.virtualenvs/fabric-merge/bin/fab poke -P -z 20
│ │ ├─fab,21462 /home/mgoose/.virtualenvs/fabric-merge/bin/fab poke -P -z 20
│ │ │ └─{fab},21493
│ │ ├─fab,21463 /home/mgoose/.virtualenvs/fabric-merge/bin/fab poke -P -z 20
│ │ │ ├─{fab},21484
│ │ │ ├─{fab},21505
│ │ │ ├─{fab},21511
│ │ │ └─{fab},21517
│ │ ├─fab,21464 /home/mgoose/.virtualenvs/fabric-merge/bin/fab poke -P -z 20
│ │ │ └─{fab},21487
│ │ ├─fab,21465 /home/mgoose/.virtualenvs/fabric-merge/bin/fab poke -P -z 20
│ │ │ ├─{fab},21483
│ │ │ ├─{fab},21502
│ │ │ ├─{fab},21503
│ │ │ └─{fab},21504
...
(16 more fab lines)
Use it and let me know
I'd love to hear how people are using this, and if they find any holes in my implementation. I've got a few more things I want/need to add into this, and I've got them listed in the github issues just until this gets integrated into the Fabric mainline.
- blog comments powered by Disqus
